Two 5” full range drivers with 1” voice coils
Formed aluminum cone diaphragm provides outstanding heat transmission
of driver
15 oz ferrite magnet for high sound performance
Tuned port tube design for increased bass performance Portable case with extendable handle
Optional Wireless Microphone Transmitter/Receiver, Weather Proof Bag and
USB module
XLR mic input with gain control
RCA unbalanced line level input with gain control
2 red peak LEDs for XLR mic and RCA line input
3 LEDs (Green, Orange & Red) to indicate the battery level, 1 red LED to
indicate the connection status of battery
1 green LED to indicate the existence of external power
3 band EQ control
Master volume control with power on/off switch
70W RMS power output, 140W peak power
Power supply from DC jack or IEC AC receptacle
Switching mode power supply - works world wide
MODEL | EZGO |
PHYSICAL FEATURES | |
FINISH | Black |
CONSTRUCTION MATERIAL | ABS ,8 mm |
GRILLE | Black |
ENCLOSURE TYPE | Vented |
RUBBER FEET | 1 |
INPUT SENSITIVITY | |
MIC | Mic in: -44dBu |
LINE | Line in: -10dBu |
MAXIMUM INPUT LEVEL | |
MIC IN | XLR Female |
LINE IN | RCA Jack |
PEAK INDICATOR | MIC Peak LED on when input level > 8dB Line Peak LED on when input level > -38dB |
POWER | |
CONTINUOUS | 70W |
PEAK | 140W |
RECEIVER | |
AC POWER SUPPLY | AC100~240V 50/60Hz |
SIGNAL TO NOISE RATIO | >80dB |
T.H.D. | <0.1% |
FREQUENCY RESPONSE | 50Hz~18KHz±3dB |
PROTECTION | Short circuit, Thermal protect |
SYSTEM SPECIFICATION | |
SYSTEM TYPE | Full range |
FREQUENCY RESPONSE @ +/- 3DB | 60-18kHz |
SENSITIVITY 1W@1M | 98 dB |
PEAK SPL | 122 dB |
SYSTEM IMPEDANCE | 4 ohm |
POWER SUPPLY | DC Jack, 12V/6A IEC Jack, AC100~240V 50/60Hz |
DRIVER | |
DRIVER SIZE | 5/125 |
FRAME MATERIAL | Steel |
DIMENSIONS (H X W X D) | 360 x 468 x 247 mm |
NET WEIGHT | 12.2kg |
GROSS WEIGHT | 14.0kg |